Scrap copper cable granulator

Editor: Henan Doing
Date:December 2, 2016

Scrap copper cable granulator Introduction
copepr cable granulaor machine
Scrap copper cable granulator
Scrap copper cable granulator  is a kind of machinery used for recycling waste & scrap copper wire and cables, which diameter should be below 20mm, such as Automobile electric wire, Motorcycle electric wire,Computer wire ,Telephone wire and other various miscellaneous material cables, communication cables and wires, etc. The successful development of Scrap copper cable granulator   solves the pollution caused by burning scrap wires.Cable recycling machine  not only improves the quality of the recovery of copper,but also has the advantage of plastic recycling.

Scrap copper cable granulator featurs
copper cable granulator
Scrap copper cable granulator  feature
1. The material of the waste wire can be telephone wire, household electric wire,  automotive wire and cables, diameter should be 0.5-25 mm.
2. Just needing 1-2 workers to operate, labour-saving, small land occupancy and investment 3. Combines many processions into one,  the whole process is controlled by PLC, including crushing,  conveying, dust collecting, separating process. It can recycle both the copper granule and PVC plastic. 4. Can separate the copper granule from the plastic by the winding separation and the vibrating separation at last. The copper purity can be 99.9%
5. No need water during the whole process, no dust, no environmental pollution.

Scrap copper cable granulator work process
1. Starting:
Please make sure all the machines are in good condition. Before getting started, please keep the machine unloaded running for 5-10 minutes.
2. Feed inlet
Please clear up iron from the mixed cables, avoiding damage to crusher blade.
3. Fine crushing
If there is any abnormal noise, please stop and check the crusher. Change different size screen, if the copper granule is too fine or too much copper without separating from plastic
4. Vibrating separator
After curshed, the mixed material will be delivered to vibrating device. The copper fro vibrating separator is complete copper without plastic,while the copper clad from the opposire discharging hole needs to be second crushed.

copper cable granulator
Scrap copper cable granulator flow chart

 
scrap copper cable granulator
Scrap copper cable granulator  flow chart

Scrap copper cable granulator Technical Parameters

 
Item Model Capacity(kg/h) Power(Kw) Size (m)(L*W*H) Weight(T) Remark
1 DY-400 100-200 28.5 3.5×1.5×3.0 1.8  
2 DY-600 300-500 36.5 4.0×1.7×3.0 3.0  
3 DY-800 500-800 90.0 4.5×1.5×4.2 7.7 Doubling crushing system
4 DY-1000 800-1000 104.2 4.8×1.8×4.2 9.4 Doubling crushing system

 

Leave Message

Please kindly leave your requirements in detail, or contact us via +86 15037138562. Our professional sales manager will contact you within 24 hours. Your contact information will be protected.

*Name:
*Country:
*WhatsApp:
*Email:
*Inquiry:
Submit Requirements