Newest wire stripping machine
Editor: Henan Doing
Date：July 29, 2016
1.Introduction for wire stripping machine
Wire stripping machine(also named waste electric wire and cable recycling equipment) is a kind of machinery used to crush waste copper wire and separate copper and plastic. The copper is on of the environment-friendly type equipment. This crushing copper machine is applicable for processing various wires and cables.
2.Features of wire stripping machine
1)Multifunctional usage: this crushing copper machine could process various kinds of cable and wire within 20mm.
2) The whole process is controlled by PLC, only needs 1-2 person to operate.
3) Made up of superior steel board, durable to use.
4) Low power consumption and cost, one investment means high profit for a long time.
5) Environmental: equipped with dust collector and doesn't need water, thus there is no pollution during operation.
6) When it is compared with other manufacturers, we have a lower and competitive price(any wires are applicable)
3. Wire stripping machine process
3. 1 Starting:
Please make sure all the machines are in good condition. Before getting started, please keep the machine unloaded running for 5-10 minutes.
3.2 Feed inlet:
Please clear up iron from the mixed cables, avoiding damage to crusher blade.
flow chart of our wire stripping machine/stripping machine
3.3 Fine crushing
If there is any abnormal noise, please stop and check the crusher. Change different size screen, if the copper granule is too fine or too much copper without separating from plastic
3.4 Vibrating separator
After curshed, the mixed material will be delivered to vibrating device. The copper fro vibrating separator is complete copper
without plastic,while the copper clad from the opposire discharging hole needs to be second crushed.
4.Display of the product of wire stripping machine
5.Technical parameters of wire stripping machine
Wire stripping machine(also named waste electric wire and cable recycling equipment) is a kind of machinery used to crush waste copper wire and separate copper and plastic. The copper is on of the environment-friendly type equipment. This crushing copper machine is applicable for processing various wires and cables.
Newest wire stripping machine
Such as Auto electric wire, computer wire, house wire, communication cables and other wires. At first it crushes or granulates these wires (or cables) into small granules, then separate copper from plastic, getting pure copper and plastic.
2.Features of wire stripping machine
1)Multifunctional usage: this crushing copper machine could process various kinds of cable and wire within 20mm.
2) The whole process is controlled by PLC, only needs 1-2 person to operate.
3) Made up of superior steel board, durable to use.
Wire stripping machine
5) Environmental: equipped with dust collector and doesn't need water, thus there is no pollution during operation.
6) When it is compared with other manufacturers, we have a lower and competitive price(any wires are applicable)
3. Wire stripping machine process
3. 1 Starting:
Please make sure all the machines are in good condition. Before getting started, please keep the machine unloaded running for 5-10 minutes.
3.2 Feed inlet:
Please clear up iron from the mixed cables, avoiding damage to crusher blade.
flow chart of our wire stripping machine/stripping machine
3.3 Fine crushing
If there is any abnormal noise, please stop and check the crusher. Change different size screen, if the copper granule is too fine or too much copper without separating from plastic
3.4 Vibrating separator
After curshed, the mixed material will be delivered to vibrating device. The copper fro vibrating separator is complete copper
without plastic,while the copper clad from the opposire discharging hole needs to be second crushed.
4.Display of the product of wire stripping machine
Final product of wire stripping machine
5.Technical parameters of wire stripping machine
| Model | Voltage | Power | Capacity | Dimension | Weight |
| DYTM-400 | 380V | 22.45 kw | 150-200kg/H | 2700*1900*2300(mm) | 1200kg |
| DYTM-600 | 380V | 36 kw | 300-400kg/H | 3500*1900*2700(mm) | 3000kg |
| DYTM-800 | 380V | 75 kw | 500-600kg/H | 5500*4500*3300(mm) | 8000k |
Leave Message
Please kindly leave your requirements in detail, or contact us via +86 15037138562. Our professional sales manager will contact you within 24 hours. Your contact information will be protected.